There are some people who wouldn’t think about the importance of keeping their bathroom looking good, and in fact, this might be the case until they realize that it’s been so long since their bathroom was painted that it looks like it is nearly falling apart due to the paint issues on the surface of the paint.
So long as you take the time to periodically repaint your bathroom, you’re going to have a rather nice looking bathroom that will look nice enough for even guests and maybe even make it so that later on you can sell your home if that is your ultimate goal.
In terms of choosing the right color for your bathroom, you may go into the selection process thinking only about how your color or colors are going to look when you have the lights on in the bathroom.
This is going to be a mistake, however, particularly if you have a good selection of natural light available to you – for most paints are going to look quite a bit different in the natural light of day than they are going to look in artificial light.
That being the case you should ensure that colors look good in both kinds of light.
In terms of painting your bathroom, you are going to want to ensure that you absolutely make use of paint that is resistant to moisture.
The reason that this is the case is that by using moisture-resistant paint you will be able to avoid mold, or at the very least put off the possibility of having mold for a long time.
Speaking of mold, you are going to need to look out for mold before you start your painting project.
Though of course, you’re going to need to properly clean the bathroom before starting, you have to be especially careful when you are on the lookout for mold and mildew because these are so very bad and can spread even after painting if you don’t fully remove it.
A well-painted bathroom is one that starts off with a smooth surface – and a way that you can achieve such a smooth surface is to start by sanding.
You’ll do well by not only sanding the surface before you apply the primer but also by gently sanding even the surfaces after you have applied a coat of primer.
As good as sanding is for the painting process, it has one leftover element that has to be cleared up after you have finished and this is for every time you sand.
That element is the sanding dust that comes about after sanding, and when you make sure to clean the sanding dust from the surface you will end up with a painting project that’s that much cleaner – you don’t want sanding dust mixed in with your paint in the end.
In any given painting project you’re going to need to ventilate the area well and this means having windows open if you can and also doors.
By doing this you will breathe better as it were because you will have a good flow of air in your painting site.
Lastly, you have to wear protective gear when you’re painting — firstly to wear long sleeved shirts to protect yourself but also the kind of masks to protect you from dust when cleaning.
You’re also going to want to wear goggles so that you don’t get dust or anything else in your eyes.
At Headwaters Painting, we aim to enrich the lives of our clients by delivering a Superior Experience. We do residential and commercial, interior, and exterior painting in Forest Lake and Blaine, MN. You can reach us at 651-278-6033 or click below to schedule a virtual estimate!